To ensure all 4 RAM slots can be populated, customers must install their DIMMs prior to installing their Hyper 212 EVO.

RAM slot order from left to right: 4-3-2-1.

If installing 2 DIMMS Use slots 1 and 3.įit the AM4 Mounting Bracket over the cooler base plate (Aluminum).

In this example we can see with Corsair LPX modules, there is ample clearance but installation would not be possible in slot #4 (far left) with the cooler installed first. Once thermal paste has been applied (or if using the pre-applied thermal paste) place the cooler evenly onto the CPU. Position the two metal clips over the plastic mounting points and tighten the thumb screws. Make sure to alternate tightening each clip, one turn at a time to ensure even spread of the thermal paste. Snap the fan onto the cooler and connect the 4 pin PWM connector to the CPU FAN header on the board.Johnpombrio said:I have the Hyper 212 EVO black edition which has a very similar mounting system. It works fine as long as I don't go crazy overclocking the CPU. With a i9-9900K and a 4.6GHz OC, I can run the fan at low speeds and have the temp max out at around 70C. I bought one of the Cooler Master Hyper 212 EVO coolers and have been hesitant to install it. Nice and quiet and good enough for me! The black looks nice had the RGB fan hooked to my ASUS mobo rolls slowly through the colors.A Noctua NH-D15 on a 9900k maxes out in the 70's degrees with no OC. #Cooler master hyper 212 installation am3 install# I figured if I mucked it up I'd fry my mother board. But the pics here showed how easy it really is to get it installed. You'll be throttling in any stress test with a Hyper 212 EVO on a 9900k. You need to dissipate around 200W of heat if you're running at 4.6 Ghz and your cooler has a TDP of 150W. You'll never get full performance out of a 9900k with your Hyper 212 EVO. #Cooler master hyper 212 installation am3 full# while waiting for my NH-D15 to arrive I was running the Hyper 212 EVO from my old computer on my new 9900k.

It took less than 30 secs sustained load for it to throttle at stock settings. #Cooler master hyper 212 installation am3 free#.

#Cooler master hyper 212 installation am3 full#.

#Cooler master hyper 212 installation am3 install#.

Cooler master 212 black install